BM 2609140260 7-05 7/26/05 10:02 AM Page 3
Keep handles dry, clean and free from oilUse clamps or other practical way to
and grease. Slippery hands cannot safelysecure and support the workpiece to a
control the power tool.stable platform. Holding the work by hand
or against your body is unstable and may
Power tool use and carelead to loss of control.
Do not force the power tool. Use the
correct power tool for your application.Battery tool use and care
The correct power tool will do the job betterRecharge only with the charger specified
and safer at the rate for which it wasby the manufacturer. A charger that is
designed.suitable for one type of battery pack may
create a risk of fire when used with another
Do not use the power tool if the switch
does not turn it on and off. Any power toolbattery pack.
that cannot be controlled with the switch isUse battery tools only with specifically
dangerous and must be repaired.designated battery packs. Use of any other
battery packs may create a risk of injury and
Disconnect the plug from the powerfire.
source and/or the battery pack from the
power tool before making anyWhen battery pack is not in use, keep it
adjustments, changing accessories, oraway from other metal objects like paper
storing power tools. Such preventive safetyclips, coins, keys, nails, screws, or other
measures reduce the risk of starting thesmall metal objects that can make a
power tool accidentally.connection from one terminal to another.
Store idle power tools out of the reach ofShorting the battery terminals together may
cause burns or a fire.
children and do not allow persons
unfamiliar with the power tool or theseUnder abusive conditions, liquid may be
instructions to operate the power tool.ejected from the battery, avoid contact. If
Power tools are dangerous in the hands ofcontact accidentally occurs, flush with
untrained users.water. If liquid contacts eyes, additionally
seek medical help. Liquid ejected from the
Maintain power tools. Check forbattery may cause irritation or burns.
misalignment or binding of moving parts,
breakage of parts and any other conditionEnsure the switch is in the off position
that may affect the power tools operation.before inserting battery pack. Inserting the
If damaged, have the power tool repairedbattery pack into power tools that have the
before use. Many accidents are caused byswitch on invites accidents.
poorly maintained power tools.
Keep cutting tools sharp and clean.Service
Have your power tool serviced by a
Properly maintained cutting tools with sharp
cutting edges are less likely to bind and arequalified repair person using only identical
easier to control.replacement parts. This will ensure that the
safety of the power tool is maintained.
Use the power tool, accessories and tool
bits etc., in accordance with theseDevelop a periodic maintenance schedule
for your tool. When cleaning a tool be
instructions and in the manner intendedcareful not to disassemble any portion of
for the particular type of power tool,
taking into account the workingthe tool since internal wires may be
misplaced or pinched or safety guard
conditions and the work to be performed.return springs may be improperly
Use of the power tool for operations different
from those intended could result in amounted. Certain cleaning agents such as
gasoline, carbon tetrachloride, ammonia, etc.
hazardous situation.may damage plastic parts.
SAVE THESE INSTRUCTIONS
-3- |