BM 2610993482 2-04 2/9/04 9:17 AM Page 11
performing any maintenance. The tool mayCertain cleaning agents
!CAUTION
be cleaned most effectively withand solvents damage
compressed dry air. Always wear safetyplastic parts. Some of these are: gasoline,
goggles when cleaning tools withcarbon tetrachloride, chlorinated cleaning
compressed air.solvents, ammonia and household
detergents that contain ammonia.
Ventilation openings and switch levers must
be kept clean and free of foreign matter. Do
not attempt to clean by inserting pointed
objects through openings.
Accessories
If an extension cord isRECOMMENDED SIZES OF EXTENSION CORDS
!WARNING
necessary, a cord with120 VOLT ALTERNATING CURRENT TOOLS
adequate size conductors that is capableCord Size in A.W.G.2
ToolOs Wire Sizes in mm
of carrying the current necessary for your
Ampere
tool must be used. This will preventCord Length in FeetCord Length in Meters
Rating
excessive voltage drop, loss of power or2550 100 15015 30 60 120
overheating. Grounded tools must use 3-3-6181616140.75 0.75 1.5 2.5
wire extension cords that have 3-prong6-8181614120.75 1.0 2.5 4.0
plugs and receptacles.8-10181614120.75 1.0 2.5 4.0
10-12161614121.0 2.5 4.0 N
NOTE: The smaller the gauge number, the
12-161412NNN N NN
heavier the cord.
** Vacuum hose
** Hose/vacuum adaptor
** Anti-splinter insert (5 pcs.)
** Cutting guide
* Allen wrench 5mm
* Steel footplate insert (1584AVS & 1584DVS)
* Plastic footplate insert (1584AVSK & 1584DVS)
* Carrying case (1584AVSK)
(*= standard equipment)
(**= optional accessories)
-11- |